Question 1

How expensive is it to replace a heat pump?

Accepted Answer

Heat pump replacement pricing varies widely and is only confirmed after an in‑home assessment of your system and home. The largest cost driver is the required capacity (size), followed by efficiency rating and how complex the installation will be. For older homes, integrating new equipment with existing infrastructure and routing line sets can change labor time in ways a quick phone quote can’t predict. We provide free, no‑obligation installation estimates so you can review options before moving forward. We frequently replace systems across Chicago’s North Shore, where careful planning helps preserve finishes in vintage homes. Key factors that typically influence total price: - System capacity and performance tier (standard vs high efficiency) - Ductwork changes or adaptations - Electrical work or thermostat upgrades - Refrigerant line‑set replacement and required permits/inspections To avoid surprises, have a licensed HVAC technician perform a load calculation and inspect ducts before selecting equipment.
Updated: 2026-11-12
Need help in Winnetka, IL? Call (847) 440-5642 or book online.

Question 2

Why Is My Heat Pump Running But Not Cooling Properly?

Accepted Answer

A heat pump that runs but doesn’t cool usually has restricted airflow, incorrect refrigerant charge, or a thermostat/control issue. The most common culprit is a dirty filter or blocked airflow that forces longer run times with little cooling. Our technicians see these patterns across Chicago’s North Shore and often find older ducts leaking or undersized returns reducing performance. Low refrigerant from a leak also cuts capacity, and mis-set thermostats can keep the system from staging correctly. Emergency help is available 24/7 when cooling suddenly drops with other warning signs. Try these quick checks before scheduling service: - Set thermostat to Cool, Fan Auto, and replace a dirty filter to restore airflow. - Clear leaves/debris from the outdoor unit and open all indoor supply vents. - Look for ice on lines or the indoor coil; if you see ice, turn cooling off and run Fan to thaw, then call. - Call promptly for new grinding/buzzing noises or a steady bill spike with weak cooling. A routine tune-up at least yearly (twice a year if used for heating and cooling) helps catch small issues before they become repairs.
Updated: 2026-02-05
Need help in Riverwoods, IL? Call (847) 440-5642 or book online.

Question 3

Why Is My Heat Pump Not Cooling on Hot Days?

Accepted Answer

A heat pump not cooling on hot days is usually caused by restricted airflow or an incorrect refrigerant charge. The most common first culprit is a clogged or overlooked air filter that starves the indoor coil of airflow, which quickly kills cooling performance. Other issues include thermostat or control faults, loose electrical connections, or a failing blower that can’t move enough air through your ducts. We service many older North Shore homes where undersized return ducts and aging wiring show up first during extreme heat, so a careful inspection matters. If the system won’t recover or trips often, a professional tune-up is the next step; emergency help is available 24/7 when cooling has fully failed. Try these quick checks before you call: - Replace or clean the air filter and make sure vents are open. - Confirm the thermostat is set to Cool and Fan Auto. - Look for ice on the indoor coil or lines and note any odd noises or odors. - If airflow is weak at multiple rooms, turn the system off and schedule service. If you see ice or smell anything unusual, turn the system off to prevent damage and call a pro for diagnosis.
Updated: 2026-04-05
Need help in Kenilworth, IL? Call (847) 440-5642 or book online.

Frequently Asked Questions About Plumbing & HVAC

Heat Pump

Still Have Questions?